•       Water based paint    水基涂料
•       Contains silicates    含硅酸鹽
•       Used in gas nitriding furnaces    用于氣體氮化爐
•       Not suitable for molten salt or fluidized bed furnaces    不適合用于在熔鹽浴或液化床爐子中
•       Designed for typical nitriding cycles  適用于典型滲氮周期
–      495 - 565oC
–      Minutes – Hours    幾分鐘 --- 幾小時
•       The more severe the cycle, the closer our recommendations should be followed
       

        周期越是嚴密，越要嚴格遵守我們下面列出的建議事項
•       Properly mix     適當?shù)幕旌?br /> •       Parts should be clean and dry    零件必須干凈干燥
•       Up to two coats are applied (0.010” – 0.020”)

  
        可以選擇涂2層涂料（0.25毫米 --- 0.50毫米）
•       Air dry 10-30 minutes    空氣中放置10-30分鐘讓涂層變干
•       After nitriding, coating residue may be removed with hot water
        氮化后，涂層殘留物可以用熱水清洗去除。